Tronix FM - EN

Video

Congratulations on the purchase of Tronix FM Transmitter! We ask that you carefully read the following instruction manual and follow it when installing transmitter.

1. Installation

  • Plug the transmitter into your car charger port. It will display the car voltage, then the Bluetooth icon. The icon will flash which means it is in pairing mode.
  • Turn on Bluetooth on your mobile device and search for "Bluetooth T10" or "T10" and connect.
  • If the pairing is successful the Bluetooth icon on the transmitter will stop flashing and will show the name of the connected device.
  • Tune the car FM radio to a blank station from between 87.5 MHz and 108 MHz.
  • The FM transmitter is now set up. It can transmit phone calls, music or navigation to the car stereo system.
  • The transmitter will auto connect the last connected device when turned on.

2. Transmitting

PLAYING MUSIC FROM MICRO SD CARD

  • Tune the car FM radio to a blank FM station.
  • Tune the FM transmitter to the same frequency as the FM station.
  • Insert your micro SD card into the FM transmitter. It will automatically detect and play the MP3/WMA/FLAC/WAV music formats.

AUX IN

If your device does not support Bluetooth and your car has an AUX out port, then you can use the provided 3.5mm audio cable to connect your device with the FM transmitter.

  • Tune the car FM radio to a blank FM station.
  • Tune the FM transmitter to the same frequency as the FM station.
  • Use the 3.5mm audio cable to connect your device with the FM transmitter.

AUX OUT

If you can't find a blank FM station or if there is too much noise when transmitting, then you can use the provided 3.5mm audio cable to transmit through Bluetooth or Micro SD card, but only if your car has aux in port.

  • Plug in your Micro SD card or pair the product with Bluetooth
  • Plug the 3.5mm audio cable into your car aux port and the FM transmitter.
  • You can now transmit music

3. Troubleshooting

Please refer below for troubleshooting:

Problem 1.
There is too much noise when streaming.

Possible cause 1.
Try a different FM station
or Use the provided 3.5 mm aux cable.

4. Technical specifications

BLUETOOTH

  • Sensitivity: -92 dbm
  • Working distance: 5 m
  • Frequency: 20 Hz - 20 KHz
  • Voltage: 10V - 24V
  • Working current: 70 mA (Max)
  • Stand-by current: 62 mA (Max)
  • RF Output: 4 dBm

FM

  • Frequency: 87.5 MHz - 108.0 MHz
  • Emission power: 87 dBuv / 107 dBuv
  • Working distance: 2 m

5. Safety notices

  • Product is compliant with the RoHS, WEE and CE directives.
  • The symbol on the side (crossed out trash bin) warns the product must not be disposed alongside other household waste, but should be disposed of at a collection center. The list of collection centers is provided to you by your public waste disposal service.
  • During charging the product may emit heat. While it may get warm it should never get too hot.
  • Keep the device away from sources of heat and direct sunlight exposure. If the devices starts to overheat, transfer it to a colder place and do not use it until it cools down.
  • Do not leave the device in places where the temperature may exceed 45°C.
  • When exposed to excessive temperatures, the lifetime of the device may be reduced.
  • If the product gets wet stop charging immediately and dry the product thoroughly.
  • Beware of excessive drops, dents, holes and deformations.
  • Contains small particles that may present a choking hazard.
  • Do not open or repair the damaged product, as there is a risk of electric shock.
  • If uncertain how to proceed, please turn off the device and contact our support.
  • Use attached components to get the best experience.
  • #01 PET - Polyethylene terephthalate.

Additional safety informating for safe use and extending product life:

  • We advise you to use a ventilation slot holder in the hottest months, which will position the device away from the direct sun.
  • Do not leave the device while charging at places exposed to direct sunlight.
View this manual in other languages